|
Logic TPS Limited
Unit 4, Sandhurst Lodge
Wokingham Road
Crowthorne
Berkshire
RG45 7QD
Tel : +44 (0)1344 750101
Fax : +44 (0)1344 780250
e-mail : info@logictps.com
|
|
|

| TABLIFT |
The TABLIFT is used for automatic continuous feeding of tablets, dragees, capsules and similar products into downstream packaging machines. The TABLIFT is designed for a discharge height range from 1500 mm to 2800 mm. |

|
Major Advantages
|
Little floor space required compared to inclined belt conveyors. |

|
Safe and gentle feeding of downstream packaging machines. Simple synchronization. |

|
GMP design in stainless steel and FDA-approved synthetic materials. |

|
Excellent cleaning through tool-less assembly/disassembly of all product contact parts. |

|
Special operation mode "Cleaning/Maintenance" |

|
No pneumatic services required |

|
Reduced product changeover times through the use of duplicate product contact parts such as feed hopper and transport bucket. |

|
Mobile on lockable castors. |

|
Synchronization option with upstream MASCHINPEX thickness and diameter sorters SORTOMAT and DIASORT |

|
Incorporated dust suction unit, chip rejection and diameter sorting device TABLIFT D available on request. |

Transport bucket near discharge position
|

Transport bucket in loading position
|

Product discharge
|
Technical Data
Feed Height
- Standard: 1500 - 2350 mm
- Other heights: on request
Output
Up to 1.500.000 tablets/h - depends on product size and feed height. |
Feed Hopper
90 litres
Operation Modes
a) Feeding
b) Maintenance/Cleaning
Electricity
230 V, 1 Ph + N + PE, 50 Hz
Dimensions
Standard: 1000 x 600 x 2950 mm |
ELEVATOR

The ELEVATOR is for continious smooth and gentle product transfer of tablets, capsules etc. to downstream equipment as sorting machines and packaging machines. |

|
Major Advantages |
|
Product area fully covered. |
|
Belt speed is infinitely variable. |
|
Mobile on lockable castors. |
|
Quick-realease belt-tensioring system. |
^ |
ELEVATOR belt is made of food grade polyurethane. |
|
Operation angle = 50° |
|
Cleaning and belt changeover position = 0° |
|

Product inlet
|

Combination with VISOMAT I
|

variable Inclination
|
Technical Data
Length
1000 - 4000 mm
Width of belt
100 mm |
Other dimensions: on request
Floor space at discharge
height 1.240 mm:
1.340 x 490 x 1580 mm (LxWxH)
Electricity
230 V, 1 Ph + N + PE, 50 Hz
auxiliary supply 24 V |

|
Contact Us
Please feel free to contact us for further information about the products and services we offer. |
|
|
©Copyright Logic TPS Limited - 2006 All rights reserved |
|
|
|
|